Scion IA Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi Scion Forums,

I am trying to find advice on how to remove the A-Pillar on the drivers side between the door and the windshield. I have heard there is an airbag in this section so if you remove the A-Pillar you need to first disconnect the battery to avoid setting off the airbags. I believe this is the piece I am seeking to remove. I have seen other Toyota's in youtube clips remove this piece by pulling using hand strength to get the A-Pillar out an inch then use needle-nose pliers to disconnect the clips from the frame to remove the A-Pillar the rest of the way. I am not sure if if I am just too timid or what, but I cannot do this when I try I feel like I am going to force it and break a clip.

Is there some trick or advice someone of this forum can provide to removing this A-Pillar? Additionally, if there is also advice on removing the trim in the 2016 Scion iA footwell to allow me better access to the fuse box, that would be appreciated.

I am trying to do this so that I can install a Hardwire kit to run power to my Viofo A129 Duo Dash Cam from the fuse box in the drivers footwell. I have numerous tutorials and seen that some installs might do this by running the wiring down the weather stripping, but no one gets into detail. The more common advice is to run the hardwire kit down the A-Pillar, through the dash and into the footwell. The Hardwire kit does come with a plastic "trim removal" tool, but it is not very substantial and I was not able to use it to make progress on the A-Pillar.

I would like to do this myself, but if it is unreleastic to do this as an amateur I will take that advice. I know that Cartoys will do the installation for a price, but I wanted to use this experience to become more familiar with the Scion.

Thanks for any advice!
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
While I can not provide advice about your specific job, I will recommend that you ignore any information about other Toyota’s except the Yaris models that match our Scion iAs. A better reference would be any Mazda, especially the CX-3 or the Mazda3. The iA was built by Mazda.
I did notice in the footwell fuse box, there was a Mazda logo in the removable piece of trim that covers the box. When you say the iA was built by Mazda, how does that work exactly? I see they have a business capital alliance, but why did Mazda build this for Toyota? I will find a Mazda forum to ask. How closely do the CX-3's, Mazda3's, and Yaris's match the iA?
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #5 ·
The iA was built by Mazda and is sold in other markets and Puerto Rico as the Mazda2. I believe it predates the new relationship between Mazda and Toyota. Auto manufacturers have been building cars together for years Toyota 86/Subaru BRZ, Toyota Supra/BMW Z4, Plymouth Laser/Mitsubishi Eclipse, and Mazda Miata/Fiat 124. But some times they just buy an existing product and stick their own name on it. Ford built a pick-up that sold as a Mazda. Chevrolet sold a Corolla with a Geo name in the 1990s. I believe the Scion xB was a Daihatsu Materia and a Subaru Dex in some countries.
Well thank you for the info I am also no posting on different Mazda forums now to get more advice.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top