[WilsonT123]

Hi everyone!
This section of the forum is dedicated to those who are looking to do their own maintenance, DIY maintenance...

Please post anything helpful that will help our ia last forever.. include tutorials and pictures

Thanks ?

 

[WilsonT123]

Found this article by Lifehacker on diy maintenance. Hopefully this can help other diyers too..

Google: Lifehacker owners maintenance
Or.
Link below

https://lifehacker.com/the-preventative-maintenance-you-need-to-do-on-your-car-1394196018

 

[Cole]

Put a dab of silicone on all of the grounds or any connection points of all the wires to prevent corrosion. It my take a while to do but its very worth it.

 

[Cole]

Neodymium magnets on the flat side of your oil filter to catch the metallic particles small enough to normally just pass right through your oil filter.

 

[Dylan Hughes]

Put a dab of silicone on all of the grounds or any connection points of all the wires to prevent corrosion. It my take a while to do but its very worth it.

I wonder if you can use the WD40 Silicone spray for that

 

[honegod]

I needed to replace the back window in my pickup and consulted a local glass shop, i was thinking to use normal silicone seal to build up a new gasket, the glass dude strongly disreccomended doing so.
the curing process releases corrosive gas that keeps working and eventually the window falls out because the body panels rust away.


they make silicone sealent for electronics, non corrosive, 's what i use.