Scion IA Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I have a 2017 iA. I got the nav card from Amazon (in Toyota packaging) about a year ago. It has worked fine until a week ago, and now won't load. It says "Navigation Loading" for about 5 seconds and then goes to a map (not where I'm at) for 5 seconds and then repeats over and over. A week ago after doing the above for a few cycles it would load and start working. Now it doesn't at all. I took the card out and cleaned the contacts with alcohol. No difference. Any thoughts would be appreciated. There are few iA's here and the dealer knows little about them.
 

· Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Another forum suggested I update. The Toyota site says the latest is Sep 2017, but when I started to update "Dec 2018" briefly appeared and it fixed the problem. I had the dealer replace the console control knobs due to very sharp edges (never deburred) and that turned out to be a major hassle. That's when it probably got corrupted. Stock system, with nav, suits me.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top